Customers

FAQ

Is it required to obtain permission to use the GPS receiver?

No appropriate registration of the permission of the SUE CEMC is required to receive devices not intended for radiation of radio waves

Do I need any documentary, licensing or other design for the distribution of the Internet via Wi-Fi indoors? If so, who should you contact? What are the deadlines for registration?

In accordance with the decision of the RCRS No612 of October 29, 2020, it is allowed to use on a secondary basis data transmission systems using Wi-Fi technology in the radio frequency bands 2400-2483.5 MHz, 5150-5190 MHz, 5210-5350 MHz, 5520-5550 MHz, 5570 -5650 MHz without registration of permits for purchase and operation, provided that the effective isotropic radiated power (EIRP) is not more than 100 mW (20 dBm).

In case of exceeding the EIRP, the use of intra-office data transmission systems using Wi-Fi technology in the above radio frequency bands should be carried out with the registration of all necessary permits in the prescribed manner.

At the same time, in order to obtain a permit for the purchase and installation of equipment, it is necessary to additionally submit documents to the Centr of Electromagnetic Comtability in accordance with paragraph 32 of §5 "Regulations on the procedure for regulating the use of the radio frequency spectrum and radio-electronic devices on the territory of the Republic of Uzbekistan".

Do I need to re-obtain permits for purchase and installation if the previous owner had these documents?

According to clause 87 "Regulations on the procedure for regulating the use of radio frequency spectrum and radio electronic means on the territory of the Republic of Uzbekistan"(Registered by the Ministry of Justice of the Republic of Uzbekistan on December 7, 2005 Registration No. 1531), "transfer of radio electronic means by one owner to another, as well as sale is allowed only with permission Center for Electromagnetic Compatibility (CEMS). The new owner is obliged, according to the procedure established in sections 6 and 9 of these Regulations, to draw up the necessary permits”

Are there any simplifications of the procedure and reduction of the time required for issuing permits for the use of the radio frequency bands 71-76 GHz and 81-86 GHz?

By the decision of the Republican Council on Radio Frequencies № 610 dated 19.10.2020. "On the simplification of the use of radio electronic means of the fixed service" there is a simplified procedure for issuing permits for the development, production, modernization, import from abroad and use by legal entities and individuals of radio frequency bands by radio relay stations of direct visibility, namely, it is not required to issue separate Decisions of the RCRF in case of compliance with the technical parameters specified in the appendix to this decision.

What bandwidth is used in the DVB-T2 standard?

1,7; 5; 6; 7; 8 and 10 MHz. The Republic of Uzbekistan uses a bandwidth of 8 MHz

How many digital TV channels can be broadcast in a single 8 MHz wide TV channel in the DVB-T2 standard?

Depending on the quality of the transmitted image. For standard SD quality, there are an average of 16 TV channels.

Is it possible to achieve stable communication inside multi-storey buildings?

There are now special (500 mVt) repeaters that amplify cellular signals that can be used to achieve stable communications in the field. These repeaters are recommended to be used in accordance with the Decision of the Republican Council on Radio Frequencies No. 256 of 2011, strictly using the services of qualified specialists for their installation. Otherwise, such randomly installed repeaters will cause radio interference in the operation of mobile base stations close to them.

What is radio frequency assignment coordination?

the procedure for obtaining the consent of one of the Parties to operate the radio-electronic means of the state of the other Party in accordance with the characteristics of the radio-frequency assignments of these radio-electronic means.

Is the import permit the basis for the use of radio frequencies and operation of radio-electronic equipment?

No.

Why is the radio communication in the room unstable or not at all?

A stable indoor connection cannot be achieved since the walls that make up the room are made of building materials that dampen radio waves, that is brick, steel and concrete products.

Did not find answer for your question?

Choose File